Tandem Extrusion Lamination Machine

YSL-T

Tandem Extrusion Lamination Machine

Applications

Machine Features

Imformation

To sandwich laminate two substrates material together, one substrate material single side coating, one substrate with double side coating, or strip(section) lamination for two substrates to be tear off easily for further recycle, the thickness of lamination can be 6 micron to 60 micron, working width can be 2mm to 6000mm, with higher extrusion capacity for higher running speed, the maximum machine speed can catch 200m/min.

It is fully automatic control by screen touch panel, and can upgrade to include mirror or embossing surface cooling roller, turn bar, recycling system, cooling system, primer coater, surface treatment device…etc.

Application can be woven sack, cement bag, onion bag, paper cup / milk box, non-woven fabric..etc.

Successful lamination machine installed countries: Taiwan, Indonesia, Philippines, China, Morocco, Argentina, Thailand, Paraguay, mexico, Pakistan, Korea, South Africa, Ecuador, Chile, Bolivia, Tunisia, Brazil, USA, Egypt, Bangladesh, Myanmar, Russia, Turkey, Costa Rica, Vietnam, Algeria, Nigeria, Ivory Coast, India, Uzbekistan, Sudan, Kazakh, Finland, Zimbabwe, Morocco, El Salvado, Honduras, Uruguay, Tanzania

Extruder

  • The extruder is specially designed for good melting and stable extrusion. It is available to add masterbatch or other functional additivities.
  • The working width of T-die can adjustment during machine production.
  • No need to adjust the die lip can change the coating thickness.
  • Film edge are stable flow rate and can control thickness.

Surface Winder

This device offers stable winding tension, the finished winded roll could be loaded on floor for a long time, and keeping round winding shape without deformation. Also the roll can be changed without stopping the machine.

Auxiliary Equipment

Surface Treatment Device

Clean and pre-treatment surface of material to increase the adhesion force on the surface of material before lamination.

Turn Bar Device

Tubular woven fabric through turn bar only by one T-Die to do both sides lamination at the same time.
Rewinder Machine

Rewinder Machine

This machine can rewind large roll to become small roll.

Turret Unwinder

The special design for BOPP film or Aluminum foil for sandwich lamination process.
Sensor for Edge Trimming

Sensor for Edge Trimming

The round knife will follow the sensor to track the laminated edge and trim it.
Model YSL-75/75T/75U YSL-90/90T/90U YSL-100/100T/100U YSL-120/120T/120U YSL-130/130T/130U
Basic specification
WORKING MATERIAL PAPER, WOVEN FABRIC, NON- WOVEN FABRIC (SPUNBOND), BOPP FILM, ALUMINUM FOIL, ONION BAGS.
RESIN PP, LDPE
LAMINATING THICKNESS 0.01~0.1 MM
PRODUCT WIDTH 700~6000 MM
IDLE SPEED 100 M/MIN / 160 M/MIN / 200 M/MIN
Extruder EXTRUDING CAPACITY 75~500 KG/HR
Option Equipments Tension controller
Turn bar
Corona
Chiller
Sensor for edge trimming
Auto cutting for winder
Turret type unwinder
Exhaust device for T-die
Perforation device
Dosing unit
Human machine interface
Mirror / Embossed Roller
Scrap vacuum suction unit
TOP